Samsung Fuse
The fuse is 250 milliamp (250 volt but this is not critical). The fuse is 3/4" inch long (20 mm) round glass with metal ends. The electrical contacts are not in the cartridge they are inside the printer. There is a plastic fuse holder on the cartridge, even the starter cartridge. If you face the cartridge with the green roller horizontal and down, the fuse holder will be on the right side just above the phillips screw and in front of the white gear you can see inside the cartridge. The fuse installs horizontally, (in line with the green roller). You just simply pop it into the holder. (I wish I knew how to post a photo, it's really easy when you figure it out.) This will stop the annoying flashing red LED and your system tray will say the cartridge is full. Good luck!!!
The fuse is 250 milliamp (250 volt but this is not critical). The fuse is 3/4" inch long (20 mm) round glass with metal ends. The electrical contacts are not in the cartridge they are inside the printer. There is a plastic fuse holder on the cartridge, even the starter cartridge. If you face the cartridge with the green roller horizontal and down, the fuse holder will be on the right side just above the phillips screw and in front of the white gear you can see inside the cartridge. The fuse installs horizontally, (in line with the green roller). You just simply pop it into the holder. (I wish I knew how to post a photo, it's really easy when you figure it out.) This will stop the annoying flashing red LED and your system tray will say the cartridge is full. Good luck!!!
Some Links for You
http://www.fixya.com/support/t3745485-reset_ml_2245_printer_page_counter
http://www.nakshatraworld.com/
http://www.techfuels.com/printer/8259-samsung-ml-2245-printer.html
Histats
No comments:
Post a Comment